AQUAMAT-ADMIX

AQUAMAT-ADMIX is suitable for any type of concrete element that is constantly or temporarily in contact with water, such as foundations, basements, water tanks, tunnels, canals, sewage and wastewater treatment tanks, swimming pools, etc.

• Provides water impermeability against positive and negative hydrostatic pressure.
• Significantly reduces capillary water absorption.
• Stays permanently active, protecting the structure throughout its service life from any water ingress.
• Seals hairline cracks up to 0.4 mm wide, even if they appear after the setting of concrete.
• Does not affect the concrete structure’s vapor permeability.
• Prevents corrosion in reinforced concrete.
• No air-entraining action.
• Free of chlorides and other corrosive ingredients.
• Compatible with all Portland cement types.
Certified according to EN 934-2: T9 and classified as a water-resisting concrete admixture. Certificate No: 0906-CPR-02412007/01. CE marked.
AQUAMAT-ADMIX complies with all the requirements established in Royal Decree 3/2023, based on Directive (EU) 2020/2184, which establishes sanitary criteria for the quality of water
for human consumption. Water tanks must be thoroughly washed prior to filling with potable water.
It has also been tested and approved by the National University of Water Management and Natural Resources (Rivne Ukraine) – Laboratory of Testing Building Materials, for the following properties:
• Increase of water tightness of concrete.
• Increase of frost resistance.
• Slight increase of final concrete strength.
AQUAMAT-ADMIX has received an Environmental Product Declaration (EPD) following an assessment of its life-cycle environmental impacts. Registration No: S-P-06171, The International EPD® System.

0.8-1.0 kg per 100 kg of cement

Grey

4 kg & 20 kg bags.