Geotextile 50 Pressed

Application with Hyperdesmo

Geotextile 50 is installed as reinforcement between two layers of Hyperdesmo, thereby increasing the amount of Hyperdesmo used.

It is used either throughout the entire waterproofing system or at specific points that require reinforcement, such as:

Joints

Cracks

Gaps

Seams

Construction details

Use with water-based or solvent-based cast waterproofing membranes

Material: 100% polyester fibers

Type: Nonwoven geotextile

Weight: 45–55 g/m²

Thickness: 0.35–0.50 mm

Tensile strength: 0.8–0.9 kN/m

Elasticity: >40%

Application temperature: 5°C to 35°C

Relative humidity during application: <85%

Roll 17 cm × 100 m

Roll 102 cm × 100 m

The different sizes allow you to select the appropriate width depending on the application site and the surface that needs reinforcement.

Geotextile 50 must be stored in a dry place at a temperature between 5°C and 25°C.