Hyperdesmo Classic

Hyperdesmo Classic is a one-component polyurethane sealant that cures with atmospheric moisture to form a water-repellent, elastic sealing membrane.

It consists of pure polyurethane elastomer resin combined with special inorganic components and is suitable for general waterproofing and protection applications. Its application creates a continuous, seamless membrane and can be applied with a roller, brush, or suitable spray equipment.

Hyperdesmo Classic is suitable for waterproofing and protecting:

  • Roofs and flat roofs
  • Patios and balconies
  • Bathrooms
  • Asphalt roofing membranes
  • Elenit and sheet metal
  • Drywall and cement board
  • Parking areas, as the primary waterproofing membrane in the appropriate system

  • One-component polyurethane sealant
  • Forms a joint-free membrane
  • High elasticity
  • Water vapor permeability
  • Resistance to hydrolysis
  • Resistance to microorganisms
  • Resistance to ultraviolet radiation when used with a suitable topcoat
  • Retains its elasticity at low temperatures
  • Suitable for application on various types of substrates
  • Allows for the bonding of covering materials to the membrane, provided the appropriate application system is followed
  • ETA-04/0082 certification
  • Minimum safe service life category W3, 25 years

  • Type: Single-component polyurethane sealant
  • Operating temperature of the membrane: -40°C to +90°C
  • Elasticity at 23°C: >500%
  • Adhesion to concrete: >2 N/mm²
  • Drying time at 25°C and 55% RH: approximately 4 hours
  • Recoating time: 6–24 hours
  • Certification: ETA-04/0082
  • Service life category: W3, 25 years

The minimum total coverage is:

1.5–1.8 kg/m²

The product is applied in two coats.

Viscosity (BROOKFIELD) at 25°C = 3,000–6,000 cP

 1.35–1.45 g/cm³ at 20 °C

Hyperdesmo Classic is available in the following colors:

  • White
  • Gray
  • Terracotta

  • 1 kg
  • 6 kg
  • 15 kg
  • 25 kg

In its original packaging, and provided it has not been opened, at least 12 months from the date of manufacture at a temperature of 5–25 °C in a dry place. Once opened, it must be consumed immediately.

Hyperdesmo Classic can be applied to properly prepared surfaces such as:

  • Concrete, reinforced or unreinforced
  • Terrazzo
  • Roofing slabs
  • Durable acrylic coatings
  • Asphalt coatings
  • Wooden surfaces
  • Oxidized metals
  • Galvanized steel and aluminum, using a suitable primer

Before application:

  • Remove any loose material
  • Clean the surface of dust
  • Remove plant matter, salts, oils, and other contaminants
  • Significant cracks must be repaired before the final application when the product is used without reinforcement
  • The material must be stirred before application

Hyperdesmo Classic can be applied using:

  • A roller
  • A brush
  • Airless spraying
  • Subsequent coats are applied at intervals of 6–24 hours, depending on weather conditions.
  • When a topcoat is required

For dark shades that remain exposed, apply a thin topcoat of Hyperdesmo Ady-E.

FAQ about Hyperdesmo Classic

Brands