Kerastile G3 S1

Kerastile G3 S1 is a high-performance, flexible, cement-based tile adhesive with extended open time, zero vertical slip, and high coverage, allowing application in thicknesses up to 10 mm.
It consists of cement, graded sand, synthetic resins, and special additives. It is suitable for bonding all types of ceramic tiles, moisture-resistant natural stones, and mosaics on floors and walls, in both interior and exterior areas, including façades.
It is classified as C2-TE-S1 according to EN 12004.

Bonding all types and sizes of ceramic tile (porcelain, single-fired, terracotta, double-fired, klinker, etc.), stable stone material not subject to staining and all types of mosaic on internal and external surfaces on floors and walls. Specically suited for large areas of flooring and large-sized tiles, particularly floors in commercial,
industrial and civil environments. Suitable for bonding on façades. May be applied in layers up to 10 mm thick.

Some application examples:
▪ Bonding ceramic tiles (porcelain, single-fired, terracotta, double-fired, klinker, etc.), stone material stable in damp environments, and mosaic on the following types of substrate well cured, dry cementitious screeds and screeds made from special binders (such as Topcem and Mapecem);
▪ heated floors;
▪ sound, well cured concrete floors;
▪ cementitious and lime/cement render on internal and external facades;
▪ internal cellular cement block walls treated with Primer G;
▪ dry gypsum and anhydrite treated with Primer G or Eco Prim T;
▪ plasterboard fastened to a rigid support;
▪ waterproofing membranes made from Mapegum WPS or Mapelastic range of products.
▪ Uncoupling, anti-fracture waterproofing membrane such as Mapeguard UM 35
▪ Spot-bonding insulating materials such as foam polyurethane, Rockwool, glass fibre wool, polystyrene and cork soundproofing panels, etc in internal walls.
▪ Overlaying old floors with ceramic tiles, terrazzo and stone material.
▪ Bonding tiles in swimming pools and tanks.
▪ Bonding on façades

Kerastile G3 S1 is a white-coloured powder made from cement, selected graded sand, a high rate of synthetic
resin and special additives according to a formula developed in MAPEI research laboratories.
Kerastile G3 S1 has very low emission of volatile organic compounds (VOC) into the area where it is applied and
safeguards the quality of the air and health of floor tilers. It is cerified as EC1 PLUS.
The use of Kerastile G3 S1 contributes to the earning of important LEED credits.
When mixed with water it forms mortar with the following characteristics:
▪ good workability;
▪ easy to apply;
▪ extended open and adjustment times to make laying operations easier.
▪ good capacity to absorb deformations in the substrate and tiles. S1 class adhesive: transversal deformability > 2.5 mm measured according to the test method described in EN 12004;
▪ perfect adhesion to all materials normally used in the building industry;
▪ hardens with negligible shrinkage;

▪ Mosaic and small tiles in general (No. 4 spreader): 2 kg/m²
▪ Normal size tiles (No. 5 spreader): 2.5-3 kg/m²
▪ Large tiles, external floors (No. 6 spreader): 5 kg/m²

kg/m³: 1.450

White

Bags 25 Kg