PLANITOP HDM MAXI

Planitop HDM Maxi is a two-component, fiber-reinforced, pre-mixed cementitious mortar with pozzolanic binders. It is used for the structural strengthening of masonry in combination with Mapegrid meshes, as well as for the levelling of concrete or masonry surfaces.
It is suitable for masonry made of natural stone, bricks, tuff, or mixed constructions, and complies with FRCM specifications, offering high reliability and mechanical strength.

Cladding facing walls, vaulted ceilings and masonry in general after patching them up.
Used in combination with mesh from the Mapegrid range to increase the shear/tensile strength of bay walls for structures in seismic zones and for structural consolidation.
Used in combination with mesh from the Mapegrid range to structurally strengthen the internal and external face of arched and vaulted masonry elements.
Levelling and repairing reinforced concrete structures.

Plastic, thixotropic mixture that can be applied on horizontal and vertical surfaces either by trowel or by spray, in layers up to 25 mm thick.
Provides high adhesion and, once cured, forms a dense layer impermeable to water and atmospheric corrosive gases, while remaining permeable to water vapor.
Planitop HDM Maxi is classified according to European standard EN 998-2 as an M25 masonry mortar, and according to EN 998-1 as a GP-type plaster, category CS IV.

1.85 kg/m² per mm of thickness.

Set 31,25 Kg (25 + 6,25)