Sika AnchorFix 2+

Sika AnchorFix-2+ is a two-component, epoxy-acrylate–based anchoring adhesive, solvent- and styrene-free, designed for applications under normal (mild) climatic conditions. It is a fast-curing material capable of carrying high loads, providing reliable and durable anchorage.
It holds an ETA according to ETAG 001 for anchoring in concrete and for rebar connections, and is also suitable for cracked concrete. It is certified for contact with potable water, making it ideal for projects with high hygiene and safety requirements.
It exhibits no sagging, even in overhead applications, ensuring stable and easy installation.

Sika AnchorFix®-2+ may only be used by experienced professionals.
As a fast curing anchoring adhesive for all grades of:
▪ Rebars / reinforcing steel
▪ Threaded rods
▪ Bolts and special fastening systems
▪ Concrete (in cracked and non-cracked)
▪ Solid masonry
▪ Steel
▪ Hard natural stone*
▪ Solid rock*
* These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika Anchor-Fix®-2+ Adhesive must be tested by first applying the Product only to a sample area. Check in particular bond strength, surface staining and discoloration.

▪ Fast curing
▪ Standard guns can be used
▪ High load capacity
▪ ETA to ETAG 001 for anchoring in concrete
▪ ETA to ETAG 001 for rebar connections
▪ Suitable for cracked concrete
▪ Drinking Water certified
▪ LEED Attestation available
▪ Non-sag, even overhead
▪ Styrene-free
▪ Low odour
▪ Low wastage