Sika MonoTop-722 MUR E

Sika MonoTop®-722 MUR E is a 1-component, ready to use, fibre reinforced cementitious mortar with reactive pozzolanic components of excellent workability and smooth finishing, used for high performance repair and strengthening works in masonries, according to EN 998-2 & EN 998-1, and for non-structural concrete repair works, according to EN 1504-3 (Class R2). Sika MonoTop®-722 MUR E in combination with SikaWrap®-350 G Grid or SikaWrap®-340 G Grid AR consistutes Sika® Textile Reinforced Mortar (TRM) system, providing an efficient consolidation of masonries and resulting in strengthening and increasing the seismic deformation capacity of them.

In combination with SikaWrap®-350G Grid (TRM system) is designed for strengthening works of masonry constructions (load-bearing masonry walls, e.t.c) in order to increase their seismic deformation capacity. TRM system is the ideal solution for improving connection between masonry panels and reinrfoced concrete frames following both substrates movements without detachment or cracking.
▪ High performance patch repairs, crack filling, pointing, leveling and rendering of new, existing and also traditional masonries (brick, stone, mixed, e.t.c.)
▪ Concrete (non-structural) repair and re-profiling or re-surfacing of damaged areas on vertical or horizontal surfaces.
▪ Suitable for use as a general purpose mortar (type GP CS-IV, according to EN 998-1) for rendering of internal and external applications.
▪ Suitable for use as designed general purpose masonry mortar (classified as G, according to EN 998-2) for external use in elements subject to structural requirements.
▪ Suitable for restoration work (Principle 3, Methods 3.1 & 3.3 of EN 1504-9). Repair of spalling and damaged concrete in buildings.
▪ Suitable for preserving or restoring passivity (Principle 7, Method 7.2 of EN 1504-9). Replacing contaminated or carbonated concrete.

Class M20/ G type, according to EN 998-2
▪ General purpose (GP), according to EN 998-1
▪ Class R2, according to EN 1504-3
▪ For application thickness of between 5mm and 15mm (per layer)
▪ Excellent workability and smooth finishing
▪ Very good adhesion on traditional substrates (brick, stone and porous surfaces such as concrete)
▪ Low modulus of elasticity: the product follows the substrate movements without detachment
▪ Suitable for non-structural patch repair works of low to medium concrete strength class, due to similar elastic modulus
▪ No consolidation of weak substrates required before application
▪ Good dimension stability / non-sag even overhead
▪ It is possible to finish / smooth the product with sponge trowel or metal float