SikaMur®-315 Grout

SikaMur®-315 Grout fills holes, cracks, crevices and cavities in brick, stone or tuff masonry constructions. The fluid-like consistency makes it possible to apply it either by pouring or by low-pressure injection. It is therefore suitable for consolidating and structurally reinforcing stone, brick or mixed masonry. SikaMur®-315 Grout is also suitable for fixing steel rods within masonry for structural strengthening via the “stitching reinforcement” technique. SikaMur®-315 Grout can be used in combination with SikaMur® rehabilitation mortars for masonry with capillary rising moisture phenomena and soluble salts.

▪ Natural Hydraulic Lime (NHL 3.5) based, cement free
▪ Easy pouring or low-pressure injecting
▪ High fluidity and very low viscosity
▪ Very cohesive without segregating or bleeding
▪ Very low heat generation during setting and hardening
▪ Final mechanical strength and modulus of elasticity are suitable and compatible with masonry structures
▪ After hardening, the masonry structure is consolidated, restoring its initial mechanical performance
▪ High filling ability of holes and gaps due to its high fluidity
▪ Suitable for masonry with capillary rising damp and soluble salts
▪ No efflorescence formation
▪ SikaMur®-315 Grout is chemically inert with any water-soluble compounds present in the constituents of
the masonry

~1.45 kg of powder per 1 lt

Fresh mortar density: ~1.90 kg/lt 
Dry bulk density (ρw): 1,550 kg/m3 

Beige powder

20 kg bags