Sikadur 32+

Sikadur 32+ is a 2-component structural adhesive, tolerant to substrate moisture, based on a combination of epoxy resins and special fillers, designed for use at temperatures between +10°C and +30°C.

Structural adhesive for bonding:
Concrete elements (including bonding fresh to hardened concrete)
▪ Hard natural stone
▪ Ceramics, fibre cement
▪ Mortar, bricks, masonry, render
▪ Steel, iron, aluminium
▪ Wood
▪ Polyester, epoxy, PU grouts (Icosit KC)
▪ Polyester / fibreglass and epoxy resin materials
▪ Fixing and anchoring for:
▪ Small Anchors
▪ Fasteners
▪ Railway fasteners

▪ Application temperature range +10 °C to +30 °C
▪ Suitable for dry and damp concrete substrates
▪ Easy to mix and apply
▪ Very good adhesion to a range of construction materials
▪ Hardens without shrinkage
▪ Different coloured parts (for mixing control)
▪ No primer needed
▪ High initial and ultimate mechanical strength
▪ Impermeable to liquids and water vapour
▪ Good chemical resistance

~1.5 kg/m2 per mm of thickness, if used as a continuous layer.
0.7 kg/m2–1.0 kg/m2 is the quantity normally needed for bonding wet fresh concrete to hardened prepared concrete.

For small anchors or fasteners (consumption in grams per hole):

Hole /Rebar Diameter	50 mm depth	80 mm depth	100 mm depth	120 mm depth	150 mm depth
10 mm /6 mm	3,8 g	6,0 g	7,5 g	9,0 g	11,3 g
12 mm /8 mm	4,7 g	7,5 g	9,4 g	11,3 g	14,1 g
14 mm /10 mm	5,7 g	9,0 g	11,3 g	13,6 g	17,0 g