Sikalastic 612

Sikalastic 612 is a single-component, cold-applied liquid polyurethane waterproofing membrane. Its curing technology is activated by atmospheric moisture and, once applied, forms a durable and elastic, seamless waterproofing membrane.

It is ready to use, requires no mixing and is applied without the use of heat or an open flame. It is suitable for exposed roof surfaces, new builds, renovations and waterproofing beneath bonded tiles on balconies and terraces.

  1. Roof waterproofing
  2. Renovation work on existing roofs
  3. Waterproofing of surfaces with complex structural details
  4. Applications in areas with limited access
  5. Waterproofing beneath bonded tiles on balconies and terraces
  6. It can be applied, following appropriate preparation and priming where required, to substrates such as:
  7. Concrete
  8. Bituminous membranes
  9. Bituminous coatings
  10. Metals
  11. Bricks
  12. Asbestos cement
  13. Ceramic tiles
  14. Wood

  • Single-component polyurethane membrane
  • Ready to use
  • Cold-applied
  • Does not require the use of heat or an open flame
  • Creates a seamless waterproofing membrane
  • Can be reinforced with mesh where required
  • Vapour-permeable
  • Retains its flexibility at low temperatures
  • Good adhesion to suitably prepared substrates
  • Easy to repaint without removing the existing coat
  • Rapid curing
  • Suitable for exposed roof surfaces

Type: Single-component polyurethane liquid membrane

Application: Cold

Tensile strength without reinforcement: approx. 4.5 N/mm²

Tensile strength with reinforcement: approx. 8 N/mm²

Elongation at break without reinforcement: approx. 180%

Elongation at break with reinforcement: approx. 50%

Operating temperature: -20°C to +80°C

Ambient temperature during application: +5°C to +40°C

Substrate temperature: +5°C to +60°C

  • System without reinforcement: ~0.7–2.0 L/m² (~1.0–2.82 kg/m²), depending on the system
  • System with reinforcement: ~2.0 L/m² (~2.82 kg/m²)

approximately 1.42 kg/L at +23°C

Λευκό RAL 9010

Γκρι RAL 7032

Τερακότα

0.75 L, approx. 1 kg

5 L, approx. 7.1 kg

15 L, approx. 21.3 kg

For example:

For cementitious substrates, use Sika Concrete Primer or Sika Bonding Primer.

For bituminous membranes and bituminous coatings, use Sikalastic Metal Primer.

For metal surfaces, use Sikalastic Metal Primer.

For an existing SikaRoof MTC system, use Sika Reactivation Primer.

Waterproofing beneath tiles

Sikalastic 612 is suitable for waterproofing beneath bonded tiles on balconies and terraces.

The system comprises two coats of Sikalastic 612 and an additional coat of Sikalastic 612 sprinkled with 0.4–0.7 mm quartz sand, prior to tile installation.

Once the membrane has fully cured, the excess quartz sand is removed, followed by the application of a suitable tile adhesive.

The substrate must be:

  • Stable
  • Of sufficient strength
  • Clean
  • Dry
  • Free from oils and greases
  • Free from contaminants that may affect adhesion
  • Depending on the type of surface, a suitable primer or mechanical preparation is required

Rain resistance and curing times

Sikalastic 612 is a fast-curing product. The applied membrane is rain-resistant approximately 10 minutes after application. Drying time and full curing time vary depending on temperature and relative humidity. Heavy or intense rainfall may cause physical damage to the membrane whilst it is still fresh.

  • Not to be applied to substrates with rising damp
  • Application restrictions
  • Not suitable for substrates with rising damp
  • Not suitable for permanent immersion in water
  • Must not be diluted with a solvent
  • Not intended for internal applications
  • Must not be applied directly onto Sikalastic thermal insulation boards without the specified intermediate layer
  • On bituminous membranes, a fully reinforced system is required

FAQ about Sikalastic 612

Brands