Ultralite S1 Flex Zero

The Ultralite S1 Flex Zero is an ultra-white, lightweight, and flexible, single-component, high-performance cement-based tile adhesive, featuring Low Dust technology for minimized dust generation during mixing.
It is composed of cement and graded sand, with a high content of synthetic resins and special lightweight aggregates of natural origin that reduce the weight of the mixture.
It is suitable for bonding all types of ceramic tiles, mosaics, engineered stone, and natural stone on interior and exterior surfaces, and is ideal for large-format tiles.
It is classified as C2-TE-S1 according to EN 12004.

▪ Bonding all types and sizes of ceramic tiles (double-fired, single-fired, porcelain, clinker, terracotta, etc.) on interior and exterior substrates.
▪ Bonding all types of mosaic on interior and exterior surfaces, also in swimming pools.
▪ Bonding stone tiles on interior and exterior surfaces (as long as the stone material is not sensitive to moisture and staining).
▪ Bonding large format porcelain tiles, also thin porcelain tiles on floors, specifically on large surface areas: due to the high back-buttering capacity, the formation of voids between the substrate and the tile is limited.
▪ Bonding on interior and exterior walls, including exterior facades.

▪ Easier to apply and transport
▪ Very high yield
▪ Excellent back-buttering capacity
▪ Ideal for installing large formats
▪ Deformable
▪ High thixotropy
▪ Less dust given off while mixing
▪ Certied for use in the marine industry
▪ Very low emission of VOC
▪ Residual Greenhouse Gas emissions fully offset through the acquisition of certified environmental credits

0.8 kg/m² per mm of thickness, which corresponds approximately to:

1.5 kg/m² for the installation of waterproofing or anti-crack membranes (using a 5 mm notched trowel).
2–3.5 kg/m² for tile installation (depending on the type of trowel used for each tile size).

1200 kg/m³

White

Bags 15 Kg